| |
|
|
flutesonline.com, LLC :: Native American Flutes :: Unfinished Flute Kits, Do-It-Yourself
Finish it yourself, the hard work is done. A great way to not only save some money but make your flute special and one of a kind.
This is a great way to get in touch with your very own personal flute. Craft it yourself. All the hard work is done. These are pre-shaped, glued together, assembled and tuned. They can be played right out of the box as received. The exterior of the flute is rough but has been rounded, the fipple hole is cut, the finger holes are already spaced out and drilled. The block has the air channel cut in it as well.
All that you need to do is to do some fine sanding and smoothing of the body, and some filing and final shaping of the mouth piece. The block can be cut or carved as you desire. Add some wood finish or oil and you are ready to go. Decorate with beads, carvings, wood burning, paint or feathers. The flute blanks are western red cedar used for its tone, quality and ease to work with. A block, leather tie, fingering charts, and instructions are included with each kit.
When it is finished you will have a flute that would normally cost $150 to $300 depending on the key.
Click here to see some completed kits.
 All of the products in this section are made in America.
| Unfinished Flute Kits, Do-It-Yourself |
|
|
|
|
|
Categories
Default
Your Cart
Authentication