| Quick Links
Native
American Flutes
All Flutes Listed
in One Place
Song Books
Flute Bags
Band Flute
Bags
Band
Flute Stuff
CDs and DVDs
Other
Instruments
Flute Stands
Band
Flute Stands
Sale Items and
Close Outs
Other Books
Unfinished
Flutes
Jewelry for Flute Players |
Hi all,
Have you ever wanted to make your own flute? A great way to not only save some money but make your flute special and one of a kind.
If you can sand wood and apply an oil or finish you can complete one
of these great unfinished flute kits.
All the hard work is done. They are
pre-shaped, glued together, assembled and tuned. They can
be played right out of the box as received. The exterior
of the flute is rough but has been rounded, the fipple hole is cut,
the finger holes are already spaced out and drilled. The block has the air
channel cut in it as well. Comes in keys A, G, F#, Low D, and Low E.
All that you need to do is some finish sanding and smoothing of the body
and some filing and final shaping of the mouth piece end of the flute.
The block can be cut or carved as you desire. Add some wood finish or oil
and you are ready to go. Decorate with beads, carvings, wood burning,
paint or feathers. The flute blanks are western red cedar used for its
tone, quality and ease to work with. A block, leather tie and instructions
are included with each kit.
When finished you will have a flute that would normally cost $150 to $300
depending on the key.
To see these kits go to http://www.flutesonline.com/flutestore/home.php?cat=256
If you have any questions please email me at walt@flutesonline.com





Some of the flutes that have been finished by flutesonline.com
customers like you.

I encourage you to browse our site at www.flutesonline.com
to see all the items we have.
Until next time,
Walt & Carol
|